Colorado [nový firmware]

[Path]

Colorado 400t software version 2.40 as of February 18, 2008

Changes made from version 2.30 to 2.40:

* Improved acquisition time in certain circumstances.
* Improved power on time.
* Improved backlight support.
* Improved support for NiMH batteries.
* Improved Wherigo player.
* Added ability to show and review geocaches on the map.
* Added ability to log geocaches as found.
* Increased maximum geocache count to 2000.
* Added support for BlueChart currents.
* Added ability to view extended information for custom POI's.
* Added ability for turn preview beep to reset the backlight timeout.
* Corrected map to display road labels.
* Corrected map to display small towns.
* Corrected map to not change orientation when beginning pan mode.
* Corrected metric nautical setting to display appropriate map scale.
* Support for Colorado Field Notes, at geocaching.com.

Changes made from version 2.20 to 2.30:

* Added setting to turn off the compass.
* Alarm clock will not change your backlight if it is already on.
* Low battery warning shows on powerup when appropriate.
* Improved DEM shading with supplemental maps.
* Fixed marine colors for depth soundings and active track.
* Added ability to view extended chart information and chart notes.
* Improve share wirelessly connection.

Changes made from version 2.10 to 2.20:

* Fixed potential shutdown when using partially discharged alkaline batteries and significant amounts of backlight.
* Improved backlight usability.
* Corrected potential memory leak on altimeter page.
* Corrected issue that changed map setting to north up if reviewing a point on the map.
* Changed the automotive view angle to match automotive products.
* Added ability to exit compass calibration if calibration fails.
* Improved performance and error handling of Share Wirelessly application.
* Corrected tone of route turn warnings.
* Added height and depth information on review pages if the information is available (related to marine maps).
* Corrected drawing of spot soundings.
* Improved drawing of satellite imagery in 400i and 400c.

[Path]

Colorado 400t software version 2.51 Beta as of April 7, 2008

Changes made from version 2.40 to 2.51:

* Added ability to reposition waypoint to current location
* Added support for language-specific keyboards
* Added support for editing location in all position formats
* Added Spanner support
* Improved drawing of BlueChart tidal areas
* Improved performance when exiting mass storage mode
* Improved paperless goecaching (various)
* Improved Wherigo player (various)
* Corrected potential shutdown when selecting maps with a large variety of maps loaded
* Corrected potential shutdown when profiling a long route
* Corrected avoiding highways
* Corrected display of found geocaches
* Corrected issue preventing name of lakes and rivers from showing when highlighted
* Corrected display of bridge heights

[Path]

Colorado 400t software version 2.54 Beta

Pozor, jedná se o beta verzi a aktualizace je na vlastní riziko!

Changes made from version 2.51 to 2.54:

* Added ability to turn elevation shading off, included in user profile settings
* Added ability to log a comment with geocaching Field Notes
* Added ability to save map selections to user profile settings
* Added compass setting to saved user profile settings
* Added tracback along current track
* Added ability to determine public land survey or USGS Quad name for Topo 24k HD cartography
* Added progress bar during software updates
* Improved odometer distance calculation
* Improved Wherigo engine
* Improved backlight behavior
* Improved compass / gps heading autoswitch behavior
* Improved keyboard behavior in address & intersection searches
* Improved behavior in low battery state
* Improved behavior of turn-by-turn route recalcuations
* Improved map drawing to eliminate redraws when not necessary
* Improved map drawing to reduce partial map draws
* Improved map drawing to enhance appearance of trails
* Improved usability of WGS84 by listing as a datum rather than just a spheroid
* Improved automatic track archiving when archiving very lengthy activity segments
* Increased maximum number of GPX files processed to 200
* Corrected guidance text to not truncate streets when not necessary
* Corrected behavior of proximity alarms in custom points of interest
* Corrected potential issues that prevented user alarm from sounding
* Corrected map drawing above 75 degrees latitude
* Corrected potential issue when attempting to delete profiles
* Corrected issue that generated extra waypoints at poweron when 'Mark Waypoint' was the first listed shortcut
* Corrected potential issue preventing 'Waypoints' from being listed in 'Where to?'
* Corrected issue that prevented poor signal strength messages from disappearing if a fix was achieved
* Corrected calculated issue that prevented complete display of large numbers
* Corrected specified schema path for GPX files
* Corrected Dutch keyboard to include 'Z' for address searches
* Corrected User Grid to retain settings between power cycles
* Corrected User Grid to allow 'E' and 'W' for longitude origin entry

[Path]

Colorado (WebUpdater) software version 2.60 as of July 17, 2008 (pouze přes WebUpdater)

Changes made from version 2.50 to 2.60:

* Added ability to turn elevation shading off, included in user profile settings
* Added ability to log a comment with geocaching Field Notes
* Added ability to save map selections to user profile settings
* Added compass setting to saved user profile settings
* Added tracback along current track
* Added ability to determine public land survey or USGS Quad name for Topo 24k HD cartography
* Added progress bar during software updates
* Added error message when the max number of geocache or gpx files is exceeded
* Added ability to search near a map point
* Added ability to use the map to add a point to a route
* Fixed shutdown when deleting a waypoint from the map
* Improved odometer distance calculation
* Improved Wherigo engine
* Improved backlight behavior
* Improved compass / GPS heading autoswitch behavior
* Improved keyboard behavior in address & intersection searches
* Improved behavior in low battery state
* Improved behavior of turn-by-turn route recalculations
* Improved map drawing to eliminate redraws when not necessary
* Improved map drawing to reduce partial map draws
* Improved map drawing to enhance appearance of trails
* Improved usability of WGS84 by listing as a datum rather than just a spheroid
* Improved automatic track archiving when archiving very lengthy activity segments
* Improved button behavior when logging geocache attempt
* Improved stopwatch timing
* Improved distance precision when reviewing a point and tracks.
* Improved inter-tidal color in non-marine colors
* Improved readability of geocache_visit.txt
* Increased maximum number of GPX files processed to 200
* Corrected guidance text to not truncate streets when not necessary
* Corrected behavior of proximity alarms in custom points of interest
* Corrected potential issues that prevented user alarm from sounding
* Corrected map drawing above 75 degrees latitude
* Corrected potential issue when attempting to delete profiles
* Corrected issue that generated extra waypoints at poweron when 'Mark Waypoint' was the first listed shortcut
* Corrected potential issue preventing 'Waypoints' from being listed in 'Where to?'
* Corrected issue that prevented poor signal strength messages from disappearing if a fix was achieved
* Corrected calculated issue that prevented complete display of large numbers
* Corrected specified schema path for GPX files
* Corrected Dutch keyboard to include 'Z' for address searches
* Corrected User Grid to retain settings between power cycles
* Corrected User Grid to allow 'E' and 'W' for longitude origin entry
* Corrected shutdown issue when unit has empty Saved.gpx file
* Corrected issue of missing active route when you select 'GO' from the full screen map in geocache mode
* Corrected issue when selecting a custom poi from the recent found list after it is removed from the system.
* Corrected issue when selecting units on the stopwatch page using non-English languages.
* Corrected issue when you spell a geocache and the list doesn't reduce when the keyboard auto-pops
* Corrected issue where you can't get to a hint for a geocache once you set it to found then back to unfound
* Corrected issue where the chart information option would show up incorrectly
* Corrected duplicate entries in the other menu when in page loop mode.
* Corrected external power lost message in non-English languages
* Corrected issue with waypoint symbol selection shutdown
* Corrected issue where the unit will hang when you try to restore a Wherigo cartridge.
* Corrected potential shutdown going to mass storage mode when you have custom POI's loaded
* Corrected issues with Cyrillic characters

[Path]

Colorado 400t software version 2.80 (13.11.2008)

Changes made from version 2.70 to 2.80:

* Fixed issue when marking waypoints in the W Malayan RSO position format.
* Added GDA94 and NAD83 datum support.
* Fixed importing gpx files from outside of the Garmin\GPX folder.

Changes made from version 2.60 to 2.70:

* Improved accuracy of altimeter for large altitude changes.
* Fixed text writing on top of itself in some geocaches descriptions.
* Fixed freeze when loading some geocaches descriptions.
* Fixed issues with power off pressure trending.
* Added support for downloading geocaches written using Groundspeak v1.1 extentions.
* Improved map drawing performance in some situations.
* Fixed 3D View not showing detail from supplemental maps.
* Fixed waypoint and geocache symbols not updating on the map after being changed.
* Fixed issue where the Colorado would temporarily stop responding after a spell search.
* Fixed issue with elevation over time plot.
* Fixed issue with position format not saving over power cycles.
* Fixed issue with display of selected location config field.

[Path]

Colorado (WebUpdater) software version 2.90 (5.12.2008)

Changes made from version 2.80 to 2.90:

* Added support for Garmin GB Discoverer maps
* Added ability to view marine chart notes for marine points
* Added ability to change the date for the tide and currents charts
* Added support for marine fishing, nautical, and off modes
* Fixed a potential shutdown that can occur when panning the map that is showing satellite imagery
* Fixed issue with 3d view not showing proper elevation detail

[Path]

Colorado software version 2.92 Beta, 16. 6. 2009, Download

Changes made from version 2.90 to 2.92:

* Report problems with beta software to ColoradoBeta@garmin.com
* Added customizable text to unit power-on screen (see \Garmin\startup.txt)
* Improved power on reliability
* Improved connection reliability with Spanner
* Improved appearance of depth data field when using big numbers
* Fixed some scan points not working properly with Garmin GB Discoverer maps
* Fixed issue with Garmin GB Discover maps not showing at some zoom levels with detail set to least
* Fixed errors in user grid entry
* Fixed the time label of the graph in Elevation Plot
* Fixed selection of Leap Day on Calendar, Hunt & Fish and Sun & Moon pages

[Path]

Colorado software version 2.94 Beta, 29.6.2009, Download

Changes made from version 2.92 to 2.94:

* Added Waypoint Averaging application. (For more information visit our new Trail Tech website at http://garmin.blogs.com/softwareupdates/trail-tech/)
* Added ability to load maps from any img file in the Garmin directory
* Added ability to see a list of points from the map when several points are at the same location
* Fixed hunting waypoint symbols not transferring properly

[Jarous1]

Colorado software version 2.95 Beta Download

Changes made from version 2.94 to 2.95:

* Fixed issue importing GPX files introduced in 2.94 beta. If updating from 2.94 beta, please remove any GPX files from the device before installing software.
* Fixed issue navigating to points.

[Path]

Colorado (WebUpdater) software version 3.00 (14.9.2009)

Changes made from version 2.90 to 3.00:

* Added Waypoint Averaging application. (For more information visit our new Trail Tech website at http://garmin.blogs.com/softwareupdates/trail-tech/)
* Added ability to load maps from any img file in the Garmin directory
* Added ability to see a list of points from the map when several points are at the same location
* Added customizable text to unit power-on screen (see \Garmin\startup.txt)
* Improved render quality of GB Discoverer maps and maps with satellite imagery
* Improved power on reliability
* Improved connection reliability with Spanner
* Improved appearance of depth data field when using big numbers
* Fixed some scan points not working properly with Garmin GB Discoverer maps
* Fixed issue with Garmin GB Discover maps not showing at some zoom levels with detail set to least
* Fixed errors in user grid entry
* Fixed the time label of the graph in Elevation Plot
* Fixed selection of Leap Day on Calendar, Hunt & Fish and Sun & Moon pages
* Fixed hunting waypoint symbols not transferring properly
* Fixed issues with routing avoidances